|
Features
- Battery Technologies The testers support Lead-Acid (Flooded Ca/Ca), AGM and GEL testing. The different batteries are diagnosed with battery specific diagnostic software.
- Menu function The menu function enables the operator to select View results, Print results, Language, Set address, Voltmeter and Perform test.
- Servo Technology The integrated Servo Technology helps determine a bad connection to the battery. When the clamps are wiggled a correct connection is established and the measurement can be performed.
- Diagnostics The testers display the diagnostics, State-of-Health and State-of-Charge, on the screen as well as on the printout. Starter and alternator diagnostics will be handled the same way.
- Workshop address The operator can enter the workshop address into the unit and this information will be on the printout.
- Surface Charge Removal In case required the tester will indicate to switch on headlights and the ventilator to remove surface charge to ensure accurate test results.
Specifications
Model:
inTECH 35P
Warranty:
Midtronics standard two years warranty
Applications:
12 volts automotive Lead-Acid (flooded), AGM and GEL batteries 12 volts starting and charging systems
Battery Test Technology:
Conductance Technology
Operating Range:
100-900 EN/SAE 100-550 DIN/IEC JIS conversion table on manual cd
Power Requirements:
Analyzer is powered by 9 volt battery for menu operation and testing down to 1 volt. During printing the tester uses the power from the battery under test.
Voltage Range:
1 - 30 volts DC, +/- 0.5 Vdc
Display:
2 line, 16 character display
Operating Temperature:
-18 to 50° C / 0 to 120° F
Interface Operations:
Dual conductor Kelvin clamps.
Housing Material
Acid/impact resistant ABS
Product Dimensions:
218 mm x 102 mm x 65 mm (8.6" x 4.0" x 2.6")
Product Weight:
499 g / 1.1 lb
Other Content:
Tester including built in printer and manual cd in carton box
|
