Insulation-Piercing Clips

• Ideally suited for automotive test and diagnostics
• Can pierce a wide range of wire types and sizes
• Feature a rotating banana jack to prevent damage to wiring

£25.00

Multimeter Probes

• Connect straight to the BNC 4mm Test Lead
• 4mm Socket in the Handle

Multimeter Probes Red £4.00 Black £4.00

Small Crocodile Clips

• 11mm jaw opening limit
• Toothed grip offers good contact on fine wire.
• Connect to the BNC 4mm Leads

Small Crocodile Clips - £3.00 Red £3.00 Black £3.00

20:1 Attenuator

• Passive 20:1 Attenuator
• Provides increased input protection against overloads.
• For measuring fuel injector and primary ignition voltages
• Connects in series between the Pico Scope and the Test Lead

£49.00

Acupuncture Probe Set

The Set Contains:

5 Probes (1 each of red, blue, black, green and yellow)

5 extra screws

Plenty of Extra needles

A durable plastic storage case

£29.00

Large Dolphin Clips

30mm Jaw opening limit

4mm socket in the back of the clip

Connects to the BNC 4mm Lead

Large Crocodile Clips - £5.00 Red £5.00 Black £5.00

Coil on Plug Probe

The Quick way to find misfires

For when you can’t use capacitive pickups

Suitable for a variety of engine makes and models

Needs no Batteries

Kit includes a 3m Long cable with an Earth clip

£105.00

6 Way Universal Break Out leads

No need to pierce insulation or back-pin connectors

Fully shrouded and insulated for safety

Connect via the BNC 4mm Leads

£129.00

4mm Shrouded to Unshrouded Adapters

For Connecting the shrouded 4mm plugs on the BNC leads to unshrouded sockets or older breakout boxes.

4mm Shrouded to Unshrouded Adaptors - £1.00 Red £1.00 Black £1.00

Extra Long BNC to 4mm Test Leads

Custom Made for the pico scope

5 m Long

Fully screened to reduce noise

£30.00

Secondary Ignition Pickup

Capacitive pickup

Connect around the insulation of an HT lead

Includes a shielded 2.5m lead

Suitable for use with most ignition systems

£35.00

BNC to 4mm Test Lead

Custom made for Automative diagnostics

3 meters

Fully screened to reduce noise pickup

£20.00

2-Pin Break out lead

2-Pin break out lead

For taking voltage reading from actuators and sensors

Connects using the BNC 4mm Lead

£25.00

60 A AC/DC Current Clamp

20A to 60A range

Measures fuel injector, fuel pump and coil currents

Push button auto Zero

Connects directly to the Pico Scope

Pico Current Clamps - £99.00 Current Clamp 60A £99.00 Current Clamp 600A £99.00 Curren Clamp 2000A £99.00

600A AC/DC Current Clamp

Display starter and charging current waveforms

Useful for quick compression tests

Connects directly to the Pico Scope

2000A AC/DC Current Clamp

Suitable for measuring currents upto 2000A DC or 1500A AC.

Connects to the BNC 4mm Leads

Included in the Commercial Vehicle Diagnostic Kit